NexSolveAI Industrial Automation & SCADA Studio™

SCADA-01 · Smart Water Tank & Pump Control System · Community/Demo Edition v1.0

● PLC RUN AUTO MODE ● COMMS OK --:--:--

Process Mimic / HMI

PROCESS NORMAL
SOURCE Raw water sump P-101 XV-101 TK-101 PRODUCT TANK LT-101 continuous level 50.0% LSHH 90% LSH 80% LSL 30% LSLL 15% Process demand / outlet flow FT-102 FT-101: 0.0 m³/h PT-101: 0.0 bar

Live PLC / SCADA Tags

IEC-style tags
TagDescriptionValueUnit/State

Alarm & Event Console

0 active

Process Trend

60 samples
Tank level %Inlet flow m³/hOutlet flow m³/h

Shift / Process KPIs

Demo Historian
Pump Runtime00:00:00
Pump Starts0
Water Pumped0.00 m³
Alarm Events0
Simulation logic: in AUTO, P-101 starts at the low-level setpoint and stops at the high-level setpoint. High-high and low-low levels generate alarms. Manual mode allows operator pump/valve commands while safety trips remain active.
Educational simulation only — not intended for direct control of safety-critical industrial equipment. © NexSolveAI.